Product

服务项目

服务热线:

15589951055

联系人:吴经理

公司地址:济南市历城区祝甸

电话:18615250275(王经理)

座机:0531-88988260

QQ:397332759/970020424

济南不干胶标签烫金工艺几种方式

来源:http://www.jindingyinshua.com   日期:2018-10-27

依据不干胶标签的加工办法,其烫金办法分为单张纸烫金与卷筒纸烫金。单张纸烫金与传统的烫金工艺相同,在专用烫金机上加工。卷筒纸烫金是在标签联动机上完结的,是运用广泛的一种加工办法。现在,济南不干胶为您介绍卷筒资料烫金有以下几种办法:

According to the processing method of self-adhesive labels, the gilding method is divided into sheet metal stamping and roll paper stamping. Sheet fed bronzing is the same as traditional bronzing process, and is processed on special bronzing machine. Roll foil stamping is finished on label linkage machine. It is the most widely used processing method. Now, Ji'nan dry glue introduces you to roll up data bronzing with the following methods:
1、标签机上平压平烫金
1. Flat stamping on the label machine.
凸版标签印刷机无论是平压平仍是圆压平型设备,因为卷筒纸间歇给纸,所以烫金全部选用平压平办法。在一般的情况下烫金工位为独立的单元,也有一些机型烫金向模切共用一个单元,分隔运用。
Gravure label printing machine is flat or circular press flat equipment, because the roll paper intermittent feeding, so all use flat stamping method. In general, the bronzing workstation is a separate unit, and some models share a single unit to separate the use of bronzing to die cutting.
2、多工位平压平烫金
2. Multi position flat stamping.
济南不干胶
有些机型有两个工位的烫金单元,其一个单元接近印版,完结横向烫金,另一个单元为独立单元,完结纵向烫金。该机型能够一起进行双色烫金。
Some models have two-station bronzing units, one of which is close to the plate, the end of horizontal bronzing, the other is a separate unit, the end of vertical bronzing. The model can carry out double color bronzing together.
3、加工机上平压平烫金
3. Flat press and hot stamping on the machine.
加工机是专为加工印刷之后的卷筒标签与不需求印刷的标签而规划的。烫金是加工机的一个功能、加工机上的烫金设备遍及选用平压平办法,其作业原理同上述的标签机。
The processing machine is specially designed for processing the reel label after printing and the label that does not need printing. Hot stamping is one of the functions of the machine. Hot stamping equipment is widely used in the machine. Its working principle is the same as the above-mentioned labeling machine.
4、轮转机上圆压圆烫金
4. Rotary press stamping.
圆压圆烫金所用的烫金版为滚筒状,烫金的时分和压印滚筒对滚触摸,完成烫金。圆压圆烫金合适在接连式输纸的轮转型标签机上运用,可是对输纸速度有一定的要求,也就是说对印刷速度有影响。可是相对于平压平烫金,大大的提高了功率。圆压圆烫金辊制造本钱比较高,所以只合适长版活烫金。
The stamping plate used for round stamping is in the shape of a cylinder. When stamping, the stamping cylinder and the stamping cylinder touch each other to finish stamping. Round stamping is suitable for the use of continuous paper feeding wheel labeling machine, but there are certain requirements for the speed of paper feeding, that is to say, the printing speed has an impact. However, compared with flat stamping, the power is greatly increased. The round pressure stamping roller has relatively high manufacturing cost, so it is only suitable for long version of live stamping.
5、轮转机上冷烫金
5. Hot stamping on rotary machine.
这是一种烫金新工艺,不再运用加热后的金属印版,而是运用印刷粘合剂的办法,使金属箔搬运,完成烫金。工艺流程是:在印刷品需求烫金的方位先印上UV压敏型粘合剂,经过UV枯燥设备使粘合剂枯燥,然后运用特种金属箔同压敏胶复合,再剥离金属箔,所以金属箔上需求转印的部分就转印到了印刷品外表,完成冷烫金。冷烫金工艺本钱比较低,节省能源,出产功率比较高,能够运用现有的设备部件,不需增加附加设备,是一种很有发展前途的新工艺。
This is a new process of bronzing, no longer the use of heated metal plate, but the use of printing adhesive method, so that the metal foil transport, complete bronzing. The technological process is as follows: the UV pressure-sensitive adhesive is printed on the position where the printing needs to be stamped, and the adhesive is dried by the UV drying equipment, then the special metal foil is combined with the pressure-sensitive adhesive, and then the metal foil is stripped off, so the transfer part of the metal foil is transferred to the surface of the printed matter, and the cold stamping is completed. Cold stamping is a new process with a bright future because of its low cost, energy saving, high output power, and the ability to use existing equipment and components without additional equipment.
本文的精彩内容由  济南不干胶提供技术支持,更多的内容请点击我们的网站:http://www.jindingyinshua.com  我们会有更多精彩的内容为您呈现。
The highlights of this article are provided by Jinan adhesive technology support, more content please click our website: http://www.jindingyinshua.com we will have more highlights for you to present.