在我们的生活中，常常用到印刷品。学生时代打印的试卷，复印的论文;求职时打印的简历，复印的获奖证书;工作中打印的合同……这些都需要我们去印刷。以上列举的这些，有的是路边简简单单的图文店就可以做到的，有些则需要印刷厂来完成。
Printed matter is often used in our daily life. Examination papers printed in student days, photocopied papers, resumes printed in job hunting, award-winning certificates duplicated, contracts printed in work... All of these need us to print. Some of these listed above can be done by a simple roadside graphic shop, while others require a printing plant to complete.
下面我们来为大家讲讲印刷过程中需要注意哪些问题吧!
Now let's talk about the problems we need to pay attention to in printing process.
1、印刷不容易干燥的产品时，堆印刷品的高度不宜过高。在墨层固着后，将印张轻轻抖动，可增加墨层与空气接触，加速油墨干燥。
1, when printing products that are not easy to dry, the height of stack prints should not be too high. After the ink layer is fixed, the printing pad lightly jitter, which can increase the contact between the ink layer and the air, and accelerate the drying of the ink.
2、当印刷幅面增大后，原先印刷纸张幅面所处的位置易出现压力不足的现象。
2. When the printing width increases, the position of the original printing paper is easy to appear the phenomenon of insufficient pressure.
3、在印刷要求较高的产品而数量又不多的情况下，可以考虑减少印版的拼数，用较小尺寸的纸张来印刷，以提高套印精度。
3. In the case of printing products with higher requirements and less quantity, we can consider reducing the number of printing plates and printing with smaller size of paper to improve the accuracy of overprinting.
4、设计版面尽量避免相同区域正反面均为大墨量印刷，且在保证颜色的情况下，尽量减少大墨量区域油墨的供给量，以免出现起泡问题。
4. Designing the layout as far as possible to avoid the same area of the positive and negative are large ink printing, and to ensure the color of the case, as far as possible to reduce the supply of large ink area ink, in order to avoid blistering problems.
5、在四色印刷中，大面积黑色实地部分加30%左右的蓝，使黑色实地墨色厚实、均匀美观。
5. In four-color printing, a large area of black solid part plus about 30% blue, so that black solid ink thick, uniform and beautiful.
6、印刷色序可根据印刷版面的色调进行调节。
6, printing color sequence can be adjusted according to the color of printed page.
7、建议将输纸轮、毛刷轮尽量放置在印张上的空白处或浅色调处，以避免输纸轮、毛刷轮引起的印迹蹭脏。
7. It is suggested that the paper feeding wheel and brush wheel should be placed as far as possible in the blank or light tone on the stamp to avoid the stain caused by the paper feeding wheel and brush wheel.
8、遇到油墨不干的现象，可在润版液中适当添加异丙醇，加快水分的蒸发。
8, when the ink does not dry, it is possible to add isopropanol in the fountain solution to speed up the evaporation of water.
以上就是我们为大家介绍的有关于印刷的常识了，然大家不一定会接触到印刷这个行业，但我们了解的这些知识，在以后的生活中也一定会用上。
The above is what we introduce to you about the printing of common sense, most of all, you do not necessarily come into contact with the printing industry, but we understand these knowledge, in the future life will also be used.
This article is from Jinan handbag. For more information, please click: http://www.jindingyinshua.com/. If there is any need for printing, please contact us. We are happy to help you.
